Aver FV2006-1 user manual Manual do Utilizador Página 1

AVer FV2006-1 User Manual

4 Web browsing requirement OS Windows 7, XP Microsoft® IE 8.0 or above [Note] Please enable “Compatibility View” while using IE 10 or above. Hardwa

5 Package contents Item Descriptions 1. FV2006-1 2. Accessory pack 3. Conversion ring 4. Power Adaptor(DC 12V/1A) (Optional) 5. CD (User’s

6 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.

7 Hardware Installation and I/O Pin Assignment 1. Set the camera  Locate cable from bottom a. Use three screws to lock the base of camera on t

8  Locate cable from side a. Open the conversion ring package in accessory. It includes a conversion ring and two set of screws. b. Use three scr

9 2. When removing the dome cover, you can see the Micro SD card slot and the reset button. 3. I/O Interface I/O Connection a. Please connect the

10 Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standard LAN in

11 IP Assignment There are two ways to find IP Cameras:  Finding IP Camera by using the “NXU Lite recording software”  Finding IP Camera by using

12 3. Click the “Setup” button. 4. Click the “Add IPCam” button. 5. Select the “IP Camera” item.

13 6. Enter IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In the Search Result window, click t

14 Finding IP Camera by using “AVer IPCam Utility” 1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The software

15 5. The IE browser will open and direct you to the IP camera login page. This requires IPViewer.ocx to run. If the IE ActiveX warning message app

16 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

17 IP camera IP addresses: A quick way to access remote monitoring is to double-click on a selected IP camera in “Camera Name list” in AVer IPCam

18 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

19 5 When the following dialogue box appears, click “Yes”.

20 Using the IP Camera Browser Interface The admin has full access to the IP camera browser interface. You can expand the menu on the left and naviga

21 Name Function (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera’s current firmware version (5) Logout

22 Name Function (14) Stream Switch to view the video stream type. The IP camera can send multiple video streams of up to 3 types. To change the vide

23 System > General In this section, only admins are authorized to configure the IP camera system maintenance and the date and time settings. Syst

Table of Contents PREFACE ...

24 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from our web

25 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

26 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the curre

27  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.  Us

28 System > Network Setting > Setting  Device Name: Used to name the IP camera to search more easily for a specific one among all connected

29 System > Network Setting > Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the vide

30  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Passwor

31  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed

32 System > Network Setting > Other 1 User may need to assign a different port to avoid conflict when setting up IP assignment. Click Apply to

33  RTSP Port: setup port for RTSP transmitting (Default: 554)  RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP

SYSTEM > NETWORK SETTING > SEVER ... 29 SYSTEM > NETWORK SETTING &

34 System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streams based on the RTSP Server.

35 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

36 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

37 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

38  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here.(Safari supports Bonjour protocol.)  LLTD:

39 System > Advance > HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over the internal o

40 Created Request: Set the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Create Self-Sig

41 System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware. To mana

42  SNMPv3: For data security reasons, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only

43 System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick the "

TROUBLESHOOTING ... 68 APPENDIX ...

44 System > Advance > QoS/DSCP QoS/DSCP (Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classifying and

45 System > Image Admin and operator levels can adjust the Image setting. There are 4 tabs: OSD, Preference, Advanced, and Privacy Mask Syste

46 System > Image > Preference In the Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust the b

47 System > Image> Advanced Click Default button will back to factory default settings.  Sense-UP: The main purpose of sense-up is to provid

48 Option Shutter Time Range (sec.) 1/60 1/33000 ~ 1/60 1/100 1/33000 ~ 1/100 1/125 1/33000 ~ 1/125 1/250 1/33000~ 1/250 1/500 1/33000 ~ 1/500 1/1000

49 System > Image> Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area # (Area 1, Area 2, Ar

50 System > Video Stream > General  Video System: PAL or NTSC  Corridor Mode: Select camera Len’s angel position – 90°, 270°, or none. The

51 Image Position 270 degrees  Corridor Mode: 90 or 270 degrees Image Position 90 degrees 270 degrees 0 degrees

52 Image Position 0 degrees

53 System > Video Stream > Stream1  Basic Mode Click Apply to save the configuration.  Resolution: There are 5 resolutions to select from –

54  Video Bitrate: 32Kbps~1Mbps (the higher the Video Bitrate is, the better the video quality is).  Video Frame Rate: The video refreshing rate

55 System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration.  Resolution: There are 5 resolutions to select from –1

56  Advanced Mode Click Apply to save the configuration.  Resolution: There are 5 resolutions to be chosen from –1280x800, 1280x720, 640x480, 320

57 System > Video Stream > Stream3 Click Apply to save the configuration.  Stream 3 Setting: Open or Disable 3GPP Streaming.  RTSP Path:

58 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera while connected to a microphone to remote site; User

59 System > SD Card Please insert microSD/SDHC card before use. Make sure to push microSD/SDHC card into the slot completely.

60 Event > Arrangement > Motion Motion Detection: IP camera allows for 3 areas motion detection areas. When motion is triggered, it can send th

61 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its recordi

62 Event > Schedule After completing the schedule setting; the motion event and snapshot function will be recorded according to the schedule setup

63 Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to some spe

1 Preface The FV2006-1 is an H.264, 720p super min vandal proof dome camera designed ultra-discreet, recessed-mount and super mini d

64 Output Setting: Mode setting: - OnOff Switch: Relay status is based on sensor triggered times. - Time Switch: To restore the original relay st

65 Network Configuration  Configuration 1 Internet1. Real IP2. PPPoEADSL Modem1. Real IP2. PPPoE a. Internet Access: ADSL or Cable Modem b. IP add

66  Configuration 2 InternetVirtual IPADSL ModemIP SharingVirtual IP a. Internet Access: ADSL or Cable Modem b. IP address: one real IP c. IP cam

67 Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power and Ethernet cable and the

68 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for FV2006-1.

69 Appendix FV2006-1 is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class

70 FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

71 THE MARK OF CROSSED-OUT WHEELED BIN INDICATES THAT THIS PRODUCT MUST NOT BE DISPOSED OF WITH YOUR OTHER HOUSEHOLD WASTE. INSTEAD, YOU NEED TO DIS

72 Limitation of Liability In no event shall aver be liable for indirect, incidental, special, exemplary, punitive, or consequential damages of any n

2 Specifications Hardware CPU Multimedia SoC RAM 256MB Flash 16M Image sensor 1 / 2.7” Mega-Pixel CMOS sensor Mini. illumination Color : 0.4 Lux @ F2

3 System Video Resolution 1920x1080@30fps, 1280x720@30fps, 640x480@30fps, 320x240@30fps, 176x144@30fps Video Adjust Brightness, Contrast, Hue, Satur