AVer IP Camera Manual do Utilizador

AVerMedia® AVerDiGi SF1311H-DV IP Camera User’s Manual June 2010

6 Hardware Installation 1. Use the L-wrench to loosen the tamper-resistant housing cover (with screws still attached on the cover). The unit has

7 Preparation Search and Set up by IPWizard IIWhen you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IP

8 View If IPWizard II finds network devices, View button will be available. Please select the device you want to view and typing Password (Default: ad

9 In case, you do not want to change username and/or password, then just click “Submit” button to perform your setting accordingly. Click “<<”

10 Using UPnP of Windows® XP or VistaUPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compa

11 Using Browser to Access the device for the first time 1. Start the web browser on the computer and type the IP address of the Netwo

12 Logging as an User If you log in the Camera as an ordinary User, “Setting” function will be not accessible. Logging as an Administrator If you log

13 Operating the IP Camera Start-up screen will be as follow no matter an ordinary users or an administrator. Video Profile The Network Camera sup

14 PTZ Control Click to display the following control panel: (1) Live View: Switch back to live view mode. (2) Direction Control Buttons: Control cam

15 Monitor Image The image shot by the Network Camera is shown here. The date and time are displayed at the top of the window. ActiveX Control The pl

FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

16 Digital Zoom Click Digital Zoom to active this function as below. User can drag or scale the box over the video to adjust zoom ratio and position.

17 Record Click Record to activate this function. Press Record button to start recording. The video file is saved as ASF format into your local PC. W

18 Statistics Click Statistics to activate this function. A window will be pop-up to show the statistics information of the streaming status. Note thi

19 About Click About to show ActiveX information.

20 Administrating the Device System Setting This function is only available for user logged into Network Camera as administrator. Click on each men

21  Obtain IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration Protocol. Enable this checked box when a DHCP server is in

22 DDNS service DDNS stands for Dynamic Domain Name Server. Your Internet Service Provider (ISP) provides you at least one IP address which you use t

23 PPPoE It allows your device with xDSL or cable connects with broadband network directly, then your device can dial up and get a dyna

24 Streaming RTSP is a streaming control protocol and a starting point for negotiating transports such as RTP, multicast and unicast, and for negotiat

25 UPnP UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking e

Table of Contents Overview ...

26 Bonjour Setting It can support both Safari and Firefox.  Bonjour: To enable or disable the bonjour function.  Friendly Name: It will be detect

27 IP Filter You can define which IP addresses are allowed.  IP Filter: To enable or disable the IP filter function.  IP Filter Policy: Choose t

28  TCP Port: Set port number of TCP server.  Message: The message will be sent to FTP server.  HTTP Notification: If enable this function,

29 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. Picture  Rotation: Turn the “Mirror

30  Sharpness: The larger value, the sharper image.  De-Noise: De-Noise can remove or lower unwanted noise and preserve fine details a

31 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. Tour Setting Up to 128 positions can be pr

32 System: Configure and Maintain System Use this menu to perform the principal settings of the device. System  Device Title: You can enter the nam

33 Date & Time You can setup the device or make it synchronized with PC or remote NTP server. Also, you may select your time zone in order to syn

34 Maintenance  Default Settings (Including the Network Setting): Recall the device hard factory default settings. Note that click t

35  Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error rate possibly and don't allow any other clients to access

Tour Setting ... 31 System: Configure and Mai

36 Video Profile Select the video profile from list to configure.  H264  Resolution: There are four resolutions in this profile: SXGA(128

37 quality but of course will consume higher bandwidth.  Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the fr

38 Audio: Audio Parameters  Audio: To enable or disable audio function  Mute While PT: To enable or disable audio while pan-tilt.  Audio Mode:

39 User: Manage User Name, Password and Login Privilege Use this menu to add, modify, or delete the usernames and passwords of the Administrator and

40 E-Mail: Setup E-Mail Configuration You may setup SMTP mail parameters for further operation of Event Schedule. That‟s, if users want

41 Object Detection: Setup Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions of

42  Sensitivity: Defines the sensitivity value of motion detection. The higher value will be more sensitive. When the system has detected the sensi

43 Event Server: Setup FTP/TCP/HTTP/SAMBA server FTP Server You may setup FTP parameters for further operation of Event Schedule. That‟s, if users wa

44 TCP Server In addition to send video file to FTP server, the device also can send event message to specified TCP server.  Name: User can speci

45  HTTP Login Password: Type the password for the HTTP server.  Proxy Address: Type the server name or the IP address of the HTTP Proxy. 

1 Overview This user‟s guide explains how to operate this camera from a computer. User should read this manual completely and carefully

46 Event Schedule: Configure the Event Schedule Setting This menu is used to specify the schedule of Event or Schedule Trigger and activate the some a

47 hours. 3. Trigger by : You do not need to choose it, because this will be triggered every minute 4. Action : Voice Alert Record User can choose

48 Appendix A: Alarm I/O Connector Some features of the Camera can be activated by the external sensor that senses physical changes in

49 CAMERA. YOU COULD RECEIVE THE FATAL ELECTRIC SHOCK.  THE EXTERNAL I/O IS NOT CAPABLE OF CONNECTING DIRECTLY TO DEVICES THAT REQUIRE LARGE AMOU

50 Appendix B: Troubleshooting & FAQ Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utili

51 Question Answer or Resolution Install this device IPWizard II program fails to save the network parameters Network may have trouble. Confirm the p

52 Question Answer or Resolution Access this device Image or video does not appear in the main page  The first time the PC connects to Networ

53 Question Answer or Resolution Access this device Pan/Tilt does not work. (including Click to Center and Preset Positioning)  Click [Refresh] o

54 Appendix C: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by s

55 Appendix D: Bandwidth Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, vi

2 Minimum System Requirements  Microsoft Internet Explorer 6.0 or later  Microsoft Media Player 11.0 or later (to playback recorded file)  VGA

56 Appendix E: Specifications Camera Image Device 1.3 Mega-pixel image sensor Effective Pixels 1280 x 1024 pixels Sensitivity 1.0V/lux-sec (550nm)

57 IP Module System Integration Video Buffer Pre- and post- alarm buffering General RAM 128MB ROM 8MB Power Supply 12V DC external power adapter

58 Appendix F: Configure Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP addres

59 [Note] Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Sta

60 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device

61 Appendix G: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP S

62 (3) After the columns show up at the left side, click “Create Account”. (4) Fill the application agreement and necessary information. a. Userna

63 (5) Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm

64 (6) Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of D

65 (9) Click the “ Dynamic DNS ”. (10) Click the “Get Started”.

3 Package Contents User can find the following items in the package as below: Item Descriptions 1. SF1311H-DV 2. Screw x 4 3. L-Wrench 4. Pow

66 (11) We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is eas

67 Appendix H: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS Argentina 220V 50 Hz *Neutral and line wires are reversed from that used in

68 Appendix I: 3GPP To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this fun

69 Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP.

70 3. Click Add/Remove Windows Components 4. The following screen will appear: 5. Select Networking Services and click Details.

71 6. Select Universal Plug and Play and click OK. 7. Click Next.

72 8. Please wait while Setup configures the components. 9. Click Finish.

4 Connections  RS485 & DI/DO Name Cable Color Function 12V Output Brown/White DC 12V (50mA maximum) GND Blue/White GND D+ Purple/White RS485 TX

5 restored to factory default settings and reboot again. [Note] Restoring the factory default setting will lose the all previous settings included IP